ATV-UTV Axles

Hey Dave, thanks for reaching out! The Erickson Round D-Ring Tie-Down Anchor #EM59110 has a capacity of 1,200 lbs and is not going to be strong enough to cinch down your Polaris RZR securely. You need the CargoSmart Anti-Rattle D-Ring Tie-Down Anchor…

The American CS6000XL that you referenced is no longer available and there isn't a direct replacement for it but the closest solution as a replacement would be the Progressive Dynamics RV Control Center part #PD4560K18LS8 which as the same…

You can replace the Center Section #C-52 for the Curt Folding Gooseneck Trailer Hitch #C61332-52 on your 1999 Ford F-250 Super Duty. I have attached a picture with the bolt hole dimensions of the plate so that you can confirm that it will bolt…

Yes we do, the correct oil seal you would need is the part #10-56 which I verified has same dimensions as the 295924 that you have now.

Hey Kurt, thanks for reaching out! For your application I recommend the Equalizer Suspension Bolt with Locknut #7-182-6-112. This is 5" long, but it does have the 1" diameter and comes with the locknut you're wanting. We don't have…

Hello Dean, thanks for reaching out. Sorry to hear the Coil SumoSprings Custom Helper Springs are giving you so much trouble. It is possible the brand new PHEV model has different coils and we just have not heard about it yet. The best thing to do…

Hello Jose. Our best option for replacing your Power Converter Model CS6000XL is the Progressive Dynamics RV Control Center part #PD4560K18LS8. The American CS6000XL that you referenced is discontinued, so this will be our closest option for…

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

Hey Scott, thanks for reaching out. A 3-5/16" hole saw is what we recommend for installing the Square D-Ring Tie-Down Anchor #ABS69FR to the floor.

The 07100 bearing number you referenced is an Timken bearing that has the same dimensions as #L44643.

You will use metal screws to install the etrailer Horizontal E-Track #e42VR. You'll also need backing plates to install this e-track and the mounting hardware is actually included with the etrailer E-Track Backing Plates with Hardware #e76YR. The…

The etrailer Horizontal E-Tracks like part #e42VR are a great option for securing vehicles especially when combined with the Erickson E-Chock Wheel Chocks part #EM09162-2 and Erickson E-Track Strap with Ratchet part #EM59136. I don't really have…